Small plastic pelletizer machine plays a key role in the process of plastic recycling and reuse. However, sometimes we may face the problem that the plastic recycling granulator machine can not start, which not only affects the production efficiency but also may lead to the waste of resources. In this article, we will discuss some common reasons why plastic granulators can not start, and put forward corresponding countermeasures.

Small plastic pelletizer machine electrical system failure

One possible reason why a small plastic pelletizer machine will not start is a fault in the electrical system. This may include problems with the power supply, poor cable connections, or damaged electrical components, resulting in an interruption in signal transmission and the plastic granulating machine failing to start properly.

Mechanical component failure

Apart from the electrical system, the failure of mechanical components is another possible reason why a small plastic pelletizer machine will not start. For example, damage to the bearings of the main components and problems with the mechanical transmission system will affect the normal operation of the plastic recycling extruder machine and hinder the starting process.

Problems with the lubrication system

The lubrication system is one of the key factors affecting the operation of plastic recycling extruder machines. If there are problems with the lubrication system, such as insufficient oil, blocked lubrication pipes or unqualified lubricant quality, it will lead to increased mechanical friction, which will make the starting process difficult or even impossible.

Solutions to the plastic pelletizer does not start

• Check the electrical system of the small plastic pelletizer machine to make sure that the power connections are working properly and that the cables are not damaged or making poor contact. Also, check the fuses on the main control panel to make sure they are not blown. If any electrical components are faulty, they must be repaired or replaced by a professional electrical technician.
• Check the main drive system of the small plastic pelletizer machine, including the motor, belts and gears. Make sure they are tightly connected and not broken or damaged. Also, check that the plastic recycling extruder machine motor is running properly and that there are no unusual sounds or odors. If problems are found, the motor may need to be repaired or replaced.
• Check the level and quality of the lubricant to make sure it is adequate and not contaminated. Check the pipes and pumps of the lubrication system to make sure they are not leaking or clogged. Change the lubricant regularly to ensure that the mechanical parts remain well-lubricated during operation. If problems are found with the lubrication system, fix them promptly to ensure proper operation of the plastic recycling extruder machine.